382 CHAPTER 11: CONFIGURING AND MANAGING PNNI
Set Optimization for
All Classes to Default Resets all the optimization parameters to their default values.
Command Actions
Command Result
Example
Enter: 1 1 9 4 3 5 2 6 y
The following message is displayed:
PNNI Node 1 of 1.
All optimization metrics were set to their defaults.
Press ENTER to continue...
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
Metrics
(6) ODF: Set Optimization for
All Classes to Default
Enter a parameter at the prompt
Parameter Format or Range
Confirm reset y or n
Direct access sequence: 1 1 9 4 3 5 2 6
System action taken: All the optimization parameters are reset to their
default values.
System message display: All optimization metrics were set to
their defaults.