3Com 9000 manual Display Port Connections, Command Actions

Display Port Connections 145

Display Port

Connections

Display UME Address Port Connection

You can display the port ATM connections.

Display UME Address Port Connection

￿Display Static Address Port Connection Display Inactive Address Port Connections

For information about establishing port connections, see “External Links

— ATM Connections” on page 85 in the Operations Guide.

Displays information about connections defined at a specific port. Specify the connection by specifying VPI/VCI values. The connections belong to virtual channels created dynamically between UME ATM addresses.

Command Actions

Enter the menu sequence: (3) CON: Connections

(3)PRT: ATM ports

(1)UME: UME addresses

Enter a parameter at the prompt

Parameter	Format or Range
Port number	<slot.group.port>
VPI	Enter a VPI value or A for all VPI values
VCI	Enter a VCI value or A for all VCI values
Direct access sequence:	3 3 1 [parameters]
Command Result
System action taken:	The connection information for the specified port is
	displayed.
System message display:	Information is displayed as shown in the examples.