3Com 9000 manual Les

LAN Emulation Redundancy 279

Redundant LES General Parameters

Table 38 describes the redundant LES general parameters.

Table 38 Redundant LES General Parameters

Parameter	Description
LES ATM Address	The LES ATM address.
Connection State	The LES connection state. This can be:
	Establish	There is a connection between the
		LECS and the LES.
	Being Established	A connection is being established
		between the LECS and the LES.
	No Connection	There is no connection between the
		LECS and the LES.
LES Location	The location of the LES. This can be: Internal or External.
	Internal	The LES is on the same switch as the
		LECS.
	External	The LES is not on the same switch as
		the LECS.
Local LES Instance	The Id of the LES on an Internal switch (this is not relevant
	for an External switch location).
Number of Active	The number of current active clients (as reported by the
Clients	LES).
Time since Last Active	The time elapsed since the LES stopped being active (in
Msg	minutes).
Number of RESET	The number of Reset messages sent to the LES by the LECS.
messages sent to LES	A Reset is attempted to solve split situations
Number of RESET	The number of Reset messages actually received by the LES
messages rcvd to LES	from the LECS (see above).
Reset LES Allowed	The number of Resets to the LES that are allowed (relevant
	only for a shared LES).
Number of ELANs	The number of ELANs that are attached to the LES.
attached to LES