3Com 9000 manual Mpoa Server Configuration Parameters, Variable Name Description

MPOA Devices Configuration 227

MPOA Server Configuration Parameters

Table 29 describes the MPOA Server configuration parameters.

.

Table 29 MPOA Server Configuration Parameters

Variable	Name	Description
MPS-p1	keep-alive time	The MPS must transmit MPOA keep-alives every MPS-p1 seconds.
		(Minimum = 1 sec., default = 10 sec., maximum = 100 sec.)
MPS-p2	keep-alive lifetime	The length of time (in seconds) an MPC may consider a keep-alive valid.
		(Minimum = 3 sec., default = 35 sec., maximum = 1000 sec.)
MPS-p3	internetwork-layer	The set of protocols for which MPOA resolution is supported. Default = ().
	protocols
MPS-p4	MPS initial retry time	Initial retry time used by the MPOA retry mechanism. (Minimum = 1 sec.,
		default = 5 sec., maximum = 300 sec.)
MPS-p5	MPS retry time	Maximum retry time used by MPOA retry mechanism.
	maximum	(Minimum = 10 sec., default = 40 sec., maximum = 300 sec.)
MPS-p6	MPS give up time	Minimum time to wait before giving up on a pending resolution request.
		(Minimum = 5 sec., default = 40 sec., maximum = 300 sec.)
MPS-p7	default holding time	Default holding time used in NHRP resolution replies. An egress MPS may
		use local information to determine a more appropriate Holding Time.
		(Minimum = 1 minute., default = 20 minutes, maximum = 120 minutes.)