396 CHAPTER 11: CONFIGURING AND MANAGING PNNI
Modify Scope
Mapping Table Modifies parameters in the scope mapping table. A change to the scope
mapping table parameters takes place after the next reboot.
Command Actions
Command Result
Scope Mapping Table Parameters
Table49 shows the scope mapping table parameters required by the
command.
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(5) SMT: Scope Mapping Table
Configuration
(2) MST: Modify Scope Mapping
Table
Enter a parameter at the prompt
Parameter Format or Range
Table index 1 to 15
PNNI level 0 to 104
Direct access sequence: 1 1 9 4 4 5 2
System action taken: The specified parameters are updated with the new
values.
System message display: PNNI Scope Mapping Table ROW NEW value
Table49 Scope Mapping Table Parameters
Name Description
Table Index # The row number in the scope mapping table.
PNNI Level The hierarchical level in the network structure.