Configuring Interface Modules 99
Reset Interface Card Reset the interface module in a specific slot, or all the inte rface module.
Command Actions
Command Result
Example
Enter: 1 5 6 0
The following prompt is displayed:
Do you really want to reset all the interface cards (Y/N)?
Enter y to confirm. The following message is displayed:
All the interface cards were reset.
Enter the menu sequence: (1) SYS: Platform Configuration
(5) IFC: Interface Cards
(6) RST: Reset Interface Card
Enter a parameter at the prompt
Parameter Format or Range
Slot Number 1 - 16 or 0 for all
Direct access sequence: 1 5 6 [parameters]
System action taken: The selected interface module is reset.
System message display: The interface card was reset.