3Com 9000 manual Switch Fabric Module Parameters, Name Description

Managing Switch Fabric Modules 87

Switch Fabric Module Parameters

Table 13 describes the switch fabric module parameters displayed by the command.

.

Table 13 Switch Fabric Module Parameters

Name	Description
Slot ID	Specifies the slot number in the chassis (slots 8 or 9). The
	asterisks (***) that appear before the Slot ID indicate to which
	Switch Fabric Module you are connected.
Slot Status	Specifies whether or not the slot contains a module, and
	whether or not the module is operational. There are three
	possible status values:
	Occupied: Operational module in slot
	Fail: Non-operational module in slot
	Free: No module in slot.
Switch Type	Specifies the CoreBuilder® 9000 ATM Enterprise Switch Fabric
	Module type
	22 x 22 ATM Switch (Module)
Switch Mode	Can be:
	Initialize
	Active (online)
	Standby: Inservice (In-Srv STBY)
	Standby: Suspend (Suspend STBY)
Memory Size	Specifies￿	the memory capacity of the switch:

64MB (extendable to 128 MB or 192 MB)