Signaling Setup 171

Display Signaling Display the current signaling protocol profile for the specified port.

Protocol Profile

The signaling protocol profile of a port defines the role that the port plays in the signaling dialog with its attached device. It can be Network or User.

When the port is connected to an end station or edge device, the port is normally defined as Network; when it is connected to another switch, it is defined automatically as User or Network depending on their network prefixes. (For more information, see “Signaling Protocol Profile” on page 92 in the Operations Guide.)

The Network port is the one that defines the VPI/VCI pair for the ATM connection.

Command Actions

Enter the menu sequence: (1) SYS: Platform configuration

(1) SET: Switch setup

(4) SIG: Signaling setup

(5) SPS: Signaling protocol configuration setup

(1) GPR: Get profiles of ports

Direct access sequence: 1 1 4 5 1

Command Result

System action taken: The current signaling protocol profile is displayed for all ports.

System message display: Information is displayed as shown in the example

Page 171
Image 171
3Com 9000 manual Protocol Profile