296 CHAPTER 9: MANAGING LAN EMULATION
Update LE_ARP
Response Policy for
Route Descriptor
Update the additional policy for handling LE_ARP requests for a Token
Ring ELAN: Reject Request or Forward Request. The new response policy
goes into effect immediately. This is a global setting for all the clients in
that ELAN. The factory default value is Forward Request. See Table 43 for
a description of LE_ARP route descriptor policies.
Command Actions
Command Result
Example
Enter: 2 2 3 1 7 2 1
The following message is displayed:
Policy was successfully saved on flash.
The LE_ARP response policy for Route Descriptors of the ELAN wi th ELA N
ID 2 is updated to Reject.
Enter menu sequence: (2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(7) SRD: Set ARP Pol. for non-reg RD
Enter a parameter at the prompt
Parameter Format or Range
ELAN ID 1–16
For more information, see “Display ELAN Parameters in
LES Database” on page 283.
Response policy 1-Reject
2-Forward Request
For more information, see Table43.
Direct access sequence: 2 2 3 1 7 [parameters]
System action taken: The LE_ARP response policy for Route Descriptors in
the specified ELAN is updated. The update takes place
immediately.
System message display: Policy was successfully saved on flash.