MANTELS
When the fireplace is being installed into a woodburning fireplace the minimum the mantel can be above the fire- place is governed by local building codes applicable to woodburning fireplaces. Consult local authorities having jurisdiction for these clearances.
The underside of the mantel will get quite warm. Use only finishes which are heat resistant and do not discolour.
The fitting of the bay window kit does not affect the dimensions or reference points in the mantel chart.
|
|
|
|
|
|
|
|
|
|
|
| Fig. 2 | |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| MANTEL CHART | |||||||
|
|
|
|
|
| ||||||||
Ref. | Mantel & Leg | Ref. | Mantel From |
| Mantel Leg from | ||||||||
|
| Shelf Depth |
| Top of Comb. | From Side of Comb. | ||||||||
|
|
|
|
|
|
|
|
| Chamber |
|
| Chamber | |
V | 10" (254 mm) | A | 19" (305 mm) |
| 10" (254mm) | ||||||||
|
|
|
|
|
|
| |||||||
W | 8" | (203 mm) | B | 17" (254 mm) |
| 8" (203mm) | |||||||
|
|
|
|
|
|
| |||||||
X | 6" | (152 mm) | C | 15" (203 mm) |
| 6" (152mm) | |||||||
|
|
|
|
|
|
| |||||||
Y | 4" | (101 mm) | D | 13" (152 mm) |
| 4" (101mm) | |||||||
|
|
|
|
|
|
| |||||||
Z | 2" | ( 51 mm) | E | 11" (101 mm) |
| 2" (51mm) |
|
| V |
|
| W |
|
| X |
|
| WALL |
A |
| Y |
|
| |
| B |
|
| C | Z |
|
| |
|
| D |
|
| E |
TOP
LOUVRE
OPENING
FIREBOX TOP
FRONT
GLASS FIREPLACE
SIDE VIEW
OPTIONAL
HEARTH
Fig. 3
FRAMING & FINISHING
Before deciding on the frame dimensions and finishing materials it is important to consider the finished dimensions of the chosen fireplace trim kit (see options section of this manual).
This information is required at this stage to ensure a satisfactory finish when the trim kit is installed.
The use of wall paper adjacent to this fireplace is not recommended, as the high heat given off by this fireplace may adversely effect the bind- ers in the adhesive used to apply the wallpa- per.
CLEARANCE TO COMBUSTIBLES
| Sides | 0 mm/0 inches |
|
|
| ||
| Sides | 0mm/0 inches |
|
| Floor | 0 mm/0 inches |
|
| Top | 0 mm/0 inches |
|
|
|
|
|
|
|
|
|
FINAL FINISHING
HEARTH
A hearth is not mandatory but it is recommended for aesthetic purposes. We recommend a
Cold climate installation recommendation: When installing this unit against a non- insulated exterior wall or chase, it is mandatory that the outer walls be insulated to conform to applicable insulation codes.
- 5 -