TRIM OPTIONS FOR HE32EF
1) RHESS, RHESL, RHESSD, RHESLD & RHESXL TRIMS
FRAME ASSEMBLY
RHESS, RHESL, RHESSD, RHESLD and RHESXL
1.Lay Trim Top Facing and Trim Side Facings, face down on to an even surface such as a table or floor. Be sure not to scratch the painted surfaces.
2.Install the nuts and bolts (Fig. 8).
10/24
SCREWS
FRAME TOP
LEFTRIGHT
FRAME FRAME
10/24
NUTS
FIG | Fig. 8 |
AS SHOWN FROM BACK |
TRIM ASSEMBLY
RHESS, RHESL, and RHESXL
1.Install trim channels (left and right sides). Use two screws to assemble each piece.
2.Slide on the trim top channel and fasten it from the back side.
3.Install the trim top deflector and use two screws to fasten it. (Fig. 9 & 10)
4.Remove ALL plastic protective covering from brass trim.
| TRIM TOP CHANNEL |
|
SCREW |
|
|
TRIM SIDE |
| TRIM SIDE |
CHANNEL | DEFLECTOR | CHANNEL |
| TRIM TOP |
|
| AS SHOWN FROM FRONT |
|
|
| Fig. 9 |
Trim Top Deflector
Trim Frame Top Section
Side View | Fig. 10 |
|
RHESSD and RHESLD (Fig. 11)
1.Install trim channels (left and right sides). Use two screws to assemble each piece.
2.Peel off plastic protective covering from top edges of the inner sides where the facing iner top will cover.
3.Place the trim facing inner top in place (do not fasten it yet). Peel off the plastic protective covering from the bottom edge.
4.Install the trim top deflector and fasten it (will hold the inner top piece). Use two screws to assemble them.
5.Install trim channels (left and right sides). Use two screws to assemble each piece.
6.Slide on the trim top channel and fasten it from the back side.
7.Remove ALL plastic protective covering from brass trim.
| TRIM TOP CHANNEL |
|
SCREW |
| TRIM FRAMING |
|
| |
|
| INNER TOP |
TRIM SIDE |
| TRIM SIDE |
CHANNEL | DEFLECTOR | |
| TRIM TOP | CHANNEL |
| TRIM FRAMING |
|
| INNER SIDES |
|
| AS SHOWN FROM FRONT |
|
|
| Fig. 11 |
A flat louvre kit OR a bay window kit needs to be chosen to complete the installation.
- 13 -
