OPERATING INSTRUCTIONS
The control compartment is located behind the lower louvre panel. To access the controls, simply flip down the lower louvre panel. To locate the position of each control de- scribed below, refer to Fig. 7.
1. MAIN ON/OFF SWITCH
The On/Off switch supplies power to all of the functions of the fireplace. This is an illuminated switch which normally will light up when in the "On/Off" position.
During any service of this appliance, the power to the unit must be turned off. It is not acceptable to use the "On/Off" switch to meet this requirement.
2. HEATER CONTROL
The Heater Control acts to turn the heater on and off as well as setting the comfort level in the room. Turning the knob clockwise from the off position will place the heater into operation. The further the knob is rotated clockwise, the higher the set point temperature. Turning the knob counterclockwise will lower the set point temperature. Turning it all the way counterclockwise will turn the heater function off.
3. LOG ILLUMINATION CONTROL
The On/Off switch controls the light located above the log set.
4. FLAME SPEED CONTROL
Turn the flame speed control knob to increase or decrease the flame speed as desired.
CONTROL PANEL
4 | 3 | 2 | 1 |
See Installation Instructions for service
details.
WARNING: Disconnect Power Before Servicing.
WARNING: Risk of fire, keep electrical cords, draping, and other furnishings at
least 3 feet (0.9m) from the front of the
heater.
Fig. 7
Voir les instructions d’installation pour des details sur le service. AVERTISSEMENT: Debrancher la source d’alimentation avant le service.
AVERTISSEMENT: Risque d’incendie, veiller a ce que les cordons electriques, tentures et autres textiles domestiques
soient a au moins 3 pieds (0,9m) de I’avant de I’appareil de chauffage.
10003375
10003375
- 9 -
