Signaling Protocol Statistics 207
Reset Signaling
Counters Resets the signaling counters for a specified port.
Command Actions
Command Result
Example
Enter: 4 5 2 1.1.1
The following message is displayed:
Reset Q93B statistics completed successfully.
The signaling statistics are reset for port <1.1.1>.
Enter the menu sequence: (4) STS: Statistics
(5) SIG: Signaling
(2) RST: Reset signaling counters
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
Direct access sequence: 4 5 2 [parameters]
System action taken: Signaling statistics are reset for the specified port.
System message display: Reset Q93B statistics completed
successfully.