Extron electronic ISS 506 manual PIP settings, Input presets

Input presets

NUser presets consist of:

•	Film mode	•	Total pixels
•	Program phase	•	Preview phase
•	Horizontal start	•	Vertical start
•	Horizontal active pixels	•	Vertical active pixels
•	Horizontal size	•	Vertical size
•	Brightnesss and contrast	•	Detail
•	Horizontal position	•	Vertical position
•	Color	•	Tint

There are 128 presets associated with each input. These presets, ideal for use when the associated input is an Extron matrix switcher, contain the entire range of adjustments, listed above, available for that input. If the input is from a matrix switcher, you can tailor a preset for each possible video signal that the matrix switcher can tie to the ISS. Save or recall an input preset as follows:

1. Click the Output dropbox.

2.Select the Program or Preview output.

3. Click the Preset number dropbox.

4.Select the desired preset number.

5. Click either the Save or Recall button.

PIP settings page

You can set variables associated with the picture-in-picture function from the PIP Setup page (figure 6-14). Access the PIP setup page by clicking the PIP Setup link on the User Control page. See chapter 3, “Operation” for descriptions of the settings on this page.

User Control

Presets

Refresh

Logos

Figure 6-14 — PIP Settings page

Select the PIP Window or PIP Image radio button to assign the setting that you make to the window or to the image.

ISS 506 Integration Seamless Switcher • HTML Operation 6-15