Extron electronic ISS 506 manual Eff4*X#*X%*X$*X, Control, PIP effect configuration

4-14 ISS 506 Integration Seamless Switcher • SIS Programming

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to switcher)	(host to switcher)	(switcher to host)
PIP effect configuration
Set the PIP effect	4*4*#	4*4*#	Eff4*X#*X%*1*X&]	Select the PIP effect for “cut” and “take” operations.
Set PIP switching subeffect and	4*4*X#*X%#	4*4*X#*X%#	Eff4*X#*X%*X$*X&]	Set the effect duration to X#, and set the PIP
duration				subeffect to X%.

NThe set PIP switching subeffect and duration command (4*4*X#*X%#) must include the leading “4” variable to specify that the X# and X% values are to be applied to the PIP switching effect.

If a different effect is selected (an effect button other than PIP is lit on the front panel), this command sets the duration and subeffect, but does not select the PIP effect.

An X% variable of 00 (cut) is a valid value for the PIP subeffect. If cut is specified, the PIP accepts the duration value X#, but this value is ignored when the take command (a cut) is issued.

Example:	4*4*35*0#	4*4*35*0#	Eff4*035*000*0*0]	Set the PIP switching duration to 3.5 seconds and
				the subeffect to “cut”. The subeffect is “cut”, so
				the duration is ignored when the take command
				is issued. In this example, “0” in the response
				indicates that PIP is not the selected effect.

View effect and configuration

NThe response to the view effect and configuration command (4*0#) varies, depending on the effect selected (the selected effect’s button is lit on the PIP’s front panel). See the detailed descriptions associated with the dissolve, wipe, title, and PIP effect and configuration commands on the preceding pages and the example for each effect shown below:

View effect and configuration	4*0#	4*0#	EffX**variable values]	See below for examples.
Example (Dissolve selected):	4*0#	4*0#	Eff1*015*nnn*1*n]	The dissolve effect is selected and the duration
				is set to 1.5 seconds. The “nnn“ and “n“

variables have no meaning in this response.

SIS Programming and Control, cont’d

and Control

Example (Wipe selected):	4*0#	4*0#
Example (Title selected):	4*0#	4*0#
Example (PIP selected):	4*0#	4*0#

Eff2*020*010*1*n] “020” is X#

“011” is X% (see page 4-13)

Eff3*085*nnn*1*1] “085” is X^

Eff4*025*015*1*0]

“015” is X% (see page 4-13)

The wipe effect is selected, the duration is set to 2 seconds, and the subeffect is set to soft square in. The “n“ variable has no meaning in this response.

The title effect is selected, the threshold is set to 85, and the title is displayed on the program output. The “nnn“ variable has no meaning in this response. The PIP effect is selected, the duration is set to

2.5seconds, the subeffect is set to hard left, and the PIP window is not displayed on the program output.

N X#= Effect duration	00 – 50 (5.0 seconds in 0.1-second increments)
X$= Effect status	1 = selected	2 = deselected
X%= Subeffect (see previous page)
X^= Threshold	000 - 255
X&= PIP or title status	0 = off (not displayed)		1 = on (displayed)
X*= “Take” effect	00 = Cut	01 = Dissolve	02 = Wipe	03 = Title key	04 = PIP