Extron electronic ISS 506 manual Email Alerts, Setting up e-mail alerts

Email Alerts page

Reach the Email Alerts page (figure 6-8) by clicking the Email Alerts link on the System Configuration page. The Email Alerts screen enables you to set up the ISS 506 to automatically send e-mail alert messages when settings are changed on the ISS 506. You may enter up to 64 e-mail addresses to alert recipients that an event has occurred.

You can also specify that SMTP (Simple Mail Transfer Protocol) authorization is needed for the ISS to accept incoming e-mail. This prevents spam from taking up space in the ISS’s e-mail system.

For the e-mail settings and for each row of the e-mail notification settings, click the Edit button to make the fields available for editing. The button changes to Save. After editing the settings associated with the Edit/Save button, click the Save button.

System Settings

ISS Settings

Scan Converter Board*

Passwords

Refresh

Firmware Upgrade

*The Scan Converter Board link is available only if the optional scan converter output board is installed.

Figure 6-8 — Email Alerts page

Setting up e-mail alerts

Set the ISS to send e-mail alerts when settings are changed as follows:

1.	On the Email Alerts screen, click the Edit button located to the right of the
	Mail IP Address and Domain Name fields. The button changes to Save.
2.	Enter your ISS 506’s IP address and your domain name in the appropriate
	fields. (This information is available from your network administrator.)
3.	If your ISS has password(s) assigned, enter them.
4.	Click the Save button.

ISS 506 Integration Seamless Switcher • HTML Operation 6-9