Extron electronic ISS 506 manual Nnn*X$*X, Wipe effect, duration, and subeffect

ISS 506 Integration Seamless Switcher • SIS Programming and Control 4-13

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to switcher)	(host to switcher)	(switcher to host)

Wipe effect, duration, and subeffect

NThe “n” variable in the wipe effect and wipe subeffect and duration responses below has no meaning.

Although they look similar, the set wipe effect command (4*2*#) and set dissolve subeffect and duration command (4*2*X#*X%#) must be sent separately for them to make the desired change.

Set the wipe effect	4*2*#	4*2*#	Eff2*X#*X%*1*n]	Set the switch effect to wipe for “take” operations.
Set wipe duration and subeffect	4*2*X#*X%#	4*2*X#*X%#	Eff2*X#*X%*X$*n]	Set the wipe duration to X#, and set the
				subeffect to X%.

NThe set wipe duration and subeffect command (4*2*X##) must include the leading “2” variable to specify that the X# and X% values are to be applied to the wipe effect.

If a different effect is selected (an effect button other than Wipe is lit on the front panel), this command sets the duration and subeffect, but does not select the wipe effect. An X% variable of 00 (cut) or 01 (dissolve) is an invalid value for the wipe subeffect.

Example:	4*2*15*8#	4*1*15*8#	Eff2*015*008*0*n]	Set the wipe switching duration to 1.5 seconds
				and the subeffect to soft curtain in. In this
				example, the “0” in the response indicates that
				wipe is not the selected effect.
View wipe effect status	4*2#	4*2#	X#*X%*X$*n]

Title effect and title key threshold

NThe “nnn” variable in the title key effect and duration responses below has no meaning.

Although they look similar, the set title effect command (4*3*#) and set threshold command (4*3*X#*X%#) must be sent separately for them to make the desired change.

Set the title effect	4*3*#	4*3*#	Eff3*X^*nnn*1*X&]	Select the title effect for “cut” and “take”
				operations.
Set the title key threshold	4*3*X^#	4*3*X^#	Eff3*X^*nnn*X$*X&]	Set the title key threshold to X^.

NThe set title key threshold command (4*3*X^#) must include the leading “3” variable to specify that the X^ value is to be applied to the title effect.

If a different effect is selected (an effect button other than Title is lit on the front panel), this command sets the threshold, but does not select the title effect.

Example:	4*3*177#		4*3*177#			Eff3*177*nnn*1*1]			Set the title key threshold to 177. In this example’s
									response, “1*1” indicates that the title effect is set
									and the title is displayed on the program output.
View title effect status	4*3#		4*3#			X^*nnn*X$*X&]
N X#= Effect duration		00	– 50 (5.0 seconds in 0.1-second increments)
X$= Effect status		1 = selected		2 = deselected
X%= Subeffect:		00	= Cut (PIP)	01	= Dissolve (PIP)	02	= Soft right	03	= Soft left	04	= Soft up
		05	= Soft down	06	= Soft center in	07	= Soft center out	08	= Soft curtain in	09	= Soft curtain out
		10	= Soft square in	11 = Soft square out		13	= Soft plus out	12	= Soft plus in	14	= Hard right
		15	= Hard left	16	= Hard up	17	= Hard down	18	= Hard center in	19	= Hard center out
		20	= Hard curtain in	21	= Hard curtain out	22	= Hard square in	23	= Hard square out	24	= Hard plus in
X^= Luma and color key level		25	= Hard plus out
		000 – 255
X&= PIP or title status		0 = off (not displayed)		1 = on (displayed)