Extron electronic ISS 506 manual X3G InX!AudX3, X3@g InX!AudX3, X3#V VolX3#

ISS 506 Integration Seamless Switcher • SIS Programming

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to switcher)	(host to switcher)	(switcher to host)
Blue screen
Turn blue screen mode on	8*1#	8*1#	Blu1]	Output sync and blue video only on both
				outputs.
Turn blue screen mode off	8*0#	8*0#	Blu0]	Output red, green, and blue video and sync.
View blue screen mode status	8#	8#	X1%]	Check blue screen mode on/off status.

Audio configuration

Audio gain and attenuation

NThe set gain (G) and set attenuation (g) commands are case sensitive. The increment audio level, decrement audio level, and view audio level commands are not case sensitive.

Set input audio gain to + dB value	X!*X3)G	X!*X3)G	InX!•AudX3!]
Example:	1*2G	1*2G	In01•Aud+02]	Set input 1 audio level to +2 dB.
Set input audio attenuation to	X!*X3@g	X!*X3@g	InX!•AudX3!]
- dB value
Increment level	X!+G	X!+G	InX!•AudX3!]	Increase audio level by 1 dB.
Example:	5+G	5+G	In05•Aud+03]	Input 5 audio level is incremented from +2 dB
				to +3 dB.
Decrement level	X!-G	X!-G	InX!•AudX3!]	Decrease audio level by 1 dB.
Example:	6-G	6-G	In06•Aud-09]	Input 6 audio level is decremented from -8 dB
				to -9 dB.
View input audio level	X!G	X!G	X3!]
Audio output volume
Set the audio output volume to a	X3#V	X3#V	VolX3#]
specific value
Example:	45V	45V	Vol45]	Set the output volume to 45%.
Increment volume	+V	+V	VolX3#]	Increase the volume by one percent.
Decrement volume	-V	-V	VolX3#]
View volume level	V	V	X3#]

and Control 4-23

NX!= Input number X1%= Blue screen X3)= Gain value

X3!= Gain or attenuation value X3@= Attenuation value

X3#= volume adjustment range

1 – 6

0 = off1 = on Numeric dB value, 00 through +24

-28 dB through +24 dB, each step = 1.0 dB Numeric dB value, -01 through -28

000 through 100 (percent)