Extron electronic ISS 506 manual Capturing a logo

Operation, cont’d

6. Press the Next button (figure 3-25). The Capture Size submenu appears.

Default

Cycle

Press

Press

Press

	NEXT
From
	Step
Figure 3-24

6

30 sec. NEXT

Capture Size

X=1024 Y=0768 Step

8

0000 0000

through through

nnnn* nnnn*

30 sec.

Save Cap to File

9.BMP

N/A or

1.BMP to

16.BMP

NEXT	30 sec.	MENU	NEXT
Step	Saving 9.BMP	Step
	yy% Done

10 N The front panel is 11 disabled until the

%Done report reaches 100%.

Step

7

Rotate the knobs to move the lower-right corner of the image area to be captured.

Step

9

Y-Axis

X-Axis

* nnnn = the selected output resolution.

Figure 3-25 — Capturing a logo, continued

7. Use the Adjust knobs to shift the end point (lower-right corner) of the capture area.

NRotate the Adjust [ knob to shift the end point on the X axis (horizontally). Rotate the Adjust { knob to shift the end point on the Y axis (vertically).

8.	Press the Next button. The Save Capture to File submenu appears.
9.	Rotate either Adjust knob to select one of the available file names (01.bmp
	through 16.bmp) or N/A (to abandon the logo).

10. Press the Next button. The LCD window displays a counter that shows the progress of the save operation until it reaches 100 percent.

NSaving a bitmap image can take a couple of minutes. The ISS is unresponsive to front panel operations and SIS commands while it saves the file.

11. Press the Next button and Menu buttons as necessary to return to the default display cycle.

3-32 ISS 506 Integration Seamless Switcher • Operation