3Com 9000 manual Port Command Actions, Parameter Format or Range

130CHAPTER 6: MANAGING NETWORK INTERFACES

Display De-registeredDisplay UME, static ATM or NNI addresses at the specified port that were

ATM Addresses at de-registered via LMA or UME but whose connections are still active.

Port

Command Actions

	Enter the menu sequence:	(3) CON: Connections
		(1) ADD: Get ATM Addresses
		(3) ACT: Get Not Active Registered
			ATM Addresses at Port
	Enter a parameter at the prompt
	Parameter	Format or Range
	Port ID	<slot.group.port> or 0.0 for all ports
	Direct access sequence:	3 1 3	[parameters]
	Command Result
	System action taken:	The de-registered UME, static ATM or NNI addresses
		for the specified port are displayed.
	System message display:	Information is displayed as shown in the example.
	Example
	Enter: 3 1 3 0.0
	The following information is displayed:
Port	ATM address: Network prefix	ATM address:user_part		Member
number			number
------- --------------------------------------- ------------------------------
<3.1.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. *			*. *. *. *. *. *. *	31101
<3.1.2> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. *			*. *. *. *. *. *. *	31201