3Com 9000 manual 9 4 3 5 2 3 parameters

Setting Optimization Metrics 379

Set Optimization for Sets the Non Real Time Variable Bit Rate (VBR) optimization parameter. A NonRealTime-VBRchange to the NrtVBR optimization parameter takes place immediately.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(3) NCF: Node Configuration
	(5) OPT: Optimization Metrics
	(2) SOP: Set Optimization
	Metrics
	(3) ONV: Optimization for
	NonRealTime-VBR
Enter a parameter at the prompt
Parameter	Format or Range
constant bit rate	0 - 6
Direct access sequence:	1 1 9 4 3 5 2 3 [parameters]

Command Result

System action taken:

System message display:

The non real time VBR optimization parameter is displayed and is updated to its new value.

Default value is <x>. New value is

<y>.

Example

Enter: 1 1 9 4 3 5 2 3 2

The following message is displayed:

Default Value is ‘3 - opt_ctd’, New value is ‘2 - opt_av_cr’

Press ENTER to continue...

The value of the NonRealTime-VBR optimization parameter is updated to 2.