3Com 9000 manual Enter 2 3 2 4 1 47.0.0.0.0.0.3c.0.0.a0

320CHAPTER 10: LEC ELAN ADMISSION SECURITY

Add a LEC to Security Adds a LEC or group of LECs to the security list of the specified ELAN for List the current session. You specify the join privilege.

Command Actions

Enter menu sequence:	(2) LEM: LAN Emulation
	(3) SEC: LE Security Configuration
	(2) STB: Security tables entries
	(4) ADR: Add a new security entry
Enter a parameter at the prompt
Parameter	Format or Range

ELAN ID

LEC ATM address or

Network Prefix

Join Privilege

1–16

See “Display ELAN Parameters in LES Database” on page 283.

A full ATM address of a LEC, in the format of 20 bytes, separated with dots

A prefix of the network part (1 to 13 bytes) of an ATM address for a section of the network (that is, prefix and "wildcard"):

The format is:

47.0.0.0.0.0.3c.0.0.a0.* — between 1-12 bytes, with ".*" at the end,

or

47.0.0.0.0.0.3c.0.0.a0.0.0.0* — exactly 13 bytes long, with "*" at the end (no ".")

1–Accept

2–Reject

Direct access sequence: 2 3 2 4 [parameters]

Command Result

System action taken: The specified LECs are added to the ELAN security list.

System message display: Entry added successfully

Example

Enter: 2 3 2 4 1 47.0.0.0.0.0.3c.0.0.a0.* 2

The following message is displayed:

Entry added successfully

The LECs with the specified network prefix are added to the ELAN security list for the ELAN with ID 1 with join privilege Reject.