390 CHAPTER 11: CONFIGURING AND MANAGING PNNI
Set UBR
Administrative
Weight
Sets the UBR Administrative Weight parameter. The UBR administrative
weight is the administrative weight of this interface port for the
unspecified bit rate service category.
Command Actions
Command Result
Example
Enter: 1 1 9 4 4 2 6 18000
The following message is displayed:
Default value is 5040, new value is set to 19000
Press ENTER to continue...
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(6) UBW: UBR Admin Weight
Enter a parameter at the prompt
Parameter Format or Range
UBR admin weight 1 - 2147483647
Direct access sequence: 1 1 9 4 4 2 6 [parameters]
System action taken: .The UBR admin weight parameter is updated to its
new value.
System message display: Default Value is 5040, New value is
set to <n>.