3Com 9000 manual GWY Default Gateway Setup, SGW Set Default Gateway, Default Gateway address was

Setting Up for Management 61

Update Default Update the Default Gateway address. The default factory Default Gateway IP Address Gateway IP address is 151.104.78.20.

The default gateway IP address is changed after the next reboot.

Command Actions

Enter the menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch Setup
	(2) MNG: Management Setup
	(3) GWY: Default Gateway Setup
	(2) SGW: Set Default Gateway
Enter a parameter at the prompt
Parameter	Format or Range
Default gateway address	Valid IP address
Direct access sequence:	1 1 2 3 2 [parameters]
Command Result
System action taken:	The default gateway address is updated.
System message display:	Default Gateway address was
	successfully set for the next reboot.

Example

Enter: 1 1 2 3 2 100.1.0.254

The following message is displayed:

Default Gateway address was successfully set for the next reboot.

The Default Gateway IP address is updated to 100.1.0.254 and takes effect after the next reboot.