52 CHAPTER 5: CONFIGURING THE PLATFORM
Update Write-access
Password Update the write-access password. Enter the new password a second
time to confirm your entry.
To accept the default password, press Enter.
Command Actions
.
Command Result
Example
Enter: 1 1 1 2
The following dialog is displayed. Note that the passwords themselves ar e
not displayed.
Enter the new write password: mypassw
Enter the new write password again: mypassw
The password has been changed.
The write-access password is updated.
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch Setup
(1) PAS: Password Setup
(2) WRI: Set Write-access Password
Enter a parameter at the prompt
Parameter Format or Range
New password 0 to 8 alphanumeric characters
New password
confirmation Enter the password exactly as you did before.
Direct access sequence: 1 1 1 2 [parameters]
System action taken: The write-access password is updated.
System message display: The password has been changed.