3Com 9000 manual Enter 3 4 2 Following prompt is displayed

136CHAPTER 6: MANAGING NETWORK INTERFACES

Table 19 Parameters (continued)

Name Description

ATM address - User part of ATM address.

User part

Member number The member number provides a sequential numbering of ATM addresses registered at a port. It is used to specify the connection.

Man Always set to YES.

Delete All Inactive Delete all ATM addresses that do not exist for the port but are currently Addresses present in flash memory. These ports are not installed or failed.

Command Actions

Enter the menu sequence: (3) CON: Connections

(4) S&C: Setup of Connections and ATM addresses

(2) STP: Static ATM Addresses Setup

(5) DNA: Delete all inactive addresses

Direct access sequence: 3 4 2 5

Command Result

System action taken: All inactive ATM addresses are erased.

System message display: Delete inactive addresses successfully.

Example

Enter: 3 4 2 5

The following prompt is displayed:

Delete all inactive addresses from flash!

Are you sure (Y/N)?

Enter y to confirm. The following message is displayed:

Delete inactive addresses successfully.