3Com 9000 manual 11 1 9 10 4 6

402CHAPTER 11: CONFIGURING AND MANAGING PNNI

Set Cache State for Determines whether or not the last cache accumulated for a route ADD PARTY (between a specific source and any destination that has previously been

accessed) will continue to be used when an ADD PARTY route is added (Save) or will be reinitialized (Drop). The default cache state for ADD PARTY is Save. If the cache refresh is dropped, all caches for recently calculated routes will be reinitialized. A change to the cache refresh status takes place immediately.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
		(9) PNI: PNNI Setup
		(4) CFP: Configure PNNI
		(6) SCR: Set Route Cache (UBR)
		Configuration
		(4) GCS: Set Cache Refresh for
		ADD PARTY
Enter a parameter at the prompt
Parameter	Format or Range
Include Add Party Route	0	- save
	1	- drop
Direct access sequence:	1	11 1 9 10 4 6 4

Command Result

System action taken:

System message display:

The PNNI cache is updated/not updated when an ADD PARTY route is calculated.

Save/Drop PNNI cache - when ADD PARTY route is calculated.

Example

Enter: 1 1 9 4 6 4 1

The following message is displayed:

Drop Cache after ADD PARTY route calculation.

Press ENTER to continue...