192 CHAPTER 8: VIEWING STATISTICS
Reset Physical Layer
Statistics Reset physical layer statistics for a specified port.
Command Actions
Command Result
Example
Enter: 4 1 2 1.1.1
The following message is displayed:
Reset physical counters completed successfully.
The physical statistics are reset for port 1.1.1.
Enter the menu sequence: (4) STS: Statistics
(1) PHY: Physical Layer
(2) RST: Reset phys layer counters
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
or Enter 0.0 - For all ports
Direct access sequence: 4 1 2 [parameters]
System action taken: Physical statistics for the switch are reset.
System message display: Reset physical counters completed
successfully.