3Com 9000 manual Standards, Protocols, Supported

Standards and Protocols Supported 31

	MIBs Supported — MIB II, AToM MIB, RMON MIB, Interface Evolution
	MIB, NCDCHASS MIB (private)
	ATM Forum Standards Compliance
	Electromagnetic Compatibility — FCC Part 15, EN50081-1 (EN55022
	￿Class B); EN50082-1 (IEC 801-2, IEC 801-3, IEC 801-4)
	Safety — EN60950, UL1950, CSA22.2, TUV, IEEE 825-1, 852-2; PCB
	UL94V-O; PCB; ANSI/IEEE; RB-276 Class 2
Standards and	This section describes the major standards and protocols used within the
Protocols	CoreBuilder 9000 ATM Enterprise Switch and the network applications
Supported	and topologies that you can use.
	ATM The CoreBuilder 9000 ATM Enterprise Switch uses ATM technology,
	including connection protocols, user-to-network and network-to-network
	interfaces. You can directly control all features via device management.
	For more information about ATM, see Chapter 3, ATM Network Basics in
	the Operations Guide.

Protocols The CoreBuilder 9000 ATM Enterprise Switch uses numerous protocols to connect to and communicate with other devices in the network. Among the protocols used is the Integrated Local Management Interface (ILMI), which is used to connect over the user-to-network interface (UNI) and network-to-network interface (NNI), as well as for address registration. Signalling (Q2931) for Switched Virtual Connection (SVC) is used for dynamically managing calls. IISP, E-IISP are implemented for multiple switch networks.

Communications Protocols — RFC 826 ARP, RFC 791 IP, RFC 792

ICMP, RDC 768 UDP, RFC 793 TCP

￿Ethernet Protocols — IEEE 802.1d, IEEE 802.3

Management Protocols — RFC 1157 SNMP, RFC 1212 Concise, RFC 1213 MIB II, RFC 1212 Traps.