290 CHAPTER 9: MANAGING LAN EMULATION
Update ELAN
Response Policy Update the response policy for an ELAN: direct VCC or distributed
connection. The new response policy takes effect immediately. This is a
global setting for all the clients in that ELAN. The factory default value is
direct connection. See Table 4 1 for th e po s sib le respo n se po li cies.
Command Actions
Command Result
Example
Enter: 2 2 3 1 3 2 1
The following messages are displayed:
Response policy was set.
Response policy was successfully saved on flash.
The response policy of the ELAN with ELAN ID 2 is updated to Direct VCC.
Enter menu sequence: (2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(3) SRE: Set & Save response policy
Enter a parameter at the prompt
Parameter Format or Range
ELAN ID 116
For more information, see “Display ELAN Parameters in
LES Database” on page 283.
Response policy 1 – Direct VCC
2 – Distrib all
Direct access sequence: 2 2 3 1 3 [parameters]
System action taken: The response policy for the specified ELAN is updated.
The update takes place immediately.
System message display: Response policy was set
Response policy was successfully saved
on flash.