3Com 9000 manual PRT ATM ports

148CHAPTER 7: CONFIGURING VIRTUAL CHANNELS

Table 21 Port SVC Connection Parameters (continued)

Name	Description
Originator	Specifies if the connection is originated at the calling UNI or
	the called UNI.
CLP	Specifies the action which is to be performed on the CLP
	bit. The possible values are: clear bit (0), set bit (1), or no
	change (N).

Display Static Display a connection relating to a specific VPI/VCI of the port or all Address Port connections (all VPI/VCI) of the port. The connections involve virtual

Connection channels created between static addresses defined by LMA.

Command Actions

Enter the menu sequence:	(3) CON: Connections
	(3) PRT: ATM ports
	(2) STC: Static addresses
Enter a parameter at the prompt
Parameter	Format or Range
Port number	<slot.group.port>
VPI	Enter a VPI value or A for all VPI values
VCI	Enter a VCI value or A for all VCI values
Direct access sequence:	3 3 2 [parameters]
Command Result
System action taken:	The connection information for the specified port is
	displayed.
System message display:	Information is displayed as shown in the example.