3Com 9000 manual Display Call-Proceeding Enable Value

call-proceeding

Signaling Setup 177

Display

Call-Proceeding

Enable Value

Display the value of the call-proceeding enable value.

With the call-proceeding enable value, the user can suppress the message that is returned to the edge device or end user

that has sent a signaling SETUP message. For more information, see “CALL PROCEEDING Message” on page 91 in the Operations Guide.

When the call-proceeding value is ON, the call-proceeding message is sent. When the call-proceeding value is OFF, the call-proceeding message is suppressed.

Command Actions

Enter the menu sequence: (1) SYS: Platform configuration

(1)SET: Switch setup

(4)SIG: Signaling setup

(6)CCL: Signaling call control setup

(1)GET: Get call proceeding value

Direct access sequence: 1 1 4 6 1

Command Result

System action taken: The call-proceeding enable flag is displayed.

System message display: Call proceeding value is <ON/OFF>.

Example

Enter: 1 1 4 6 1

The following message is displayed:

Call proceeding value is ON.