Create Permanent Virtual Channel (PVC) 159

Release PVC Release a single destination connection (branch) from a

Destination point-to-multipoint call. Specify the P2M call number and the output port number and VPI/VCI of the destination connection.

Command Actions

Enter the menu sequence: (3) CON: Connections

(4) S&C: Setup of Connections and ATM

Addresses

(1) PVC: PVCs Setup

(6) REO: Release Out VC from call

Enter a parameter at the prompt

Parameter

Format or Range

Call number of the P2M connection

Destination connection port number

Destination connection

VPI

Destination connection

VCI

Direct access sequence:

Command Result

System action taken:

System message display:

Integer. See“Display Call Routed to ATM Address” on page 140 to get a call number for a port.

<slot.group.port>

See “Display PVC VPI/VCI Limits” on page 151 for VPI/VCI limits.

See “Display PVC VPI/VCI Limits” on page 151 for VPI/VCI limits.

3 4 1 6 [parameters]

A PVC call destination with parameters specified is released.

A message is displayed as shown in the example.

Page 159
Image 159
3Com 9000 manual Parameter