3Com 9000 manual Parameter Format or Range Port number Slot.group.port, 4 2 parameters

Signaling Timers 183

Display UNI Signaling Display the current Q93B signaling timer values in seconds. These values Timers are the same for all ports because they all work on a common timer. Enter any port identifier. To alter these values, update the timer resolution. For more information, see “Update Protocol Timer Resolution” on page 182.

Command Actions

Enter the menu sequence: (1) SYS: Platform configuration

(1) SET: Switch setup

(4) SIG: Signaling setup

(2) TMR: Get Signaling Q93B timers

Enter a parameter at the prompt

Parameter	Format or Range
Port number	<slot.group.port>
Direct access sequence:	1 1 4 2 [parameters]
Command Result
System action taken:	The current Q93B Signaling timers for all ports are
	displayed in seconds.
System message display:	Information is displayed as shown in the example.