3Com 9000 manual Command to initialize the Elan security list, Following message is displayed

LECs in ELAN Security List 319

Add All Joined LECs Adds all currently–connected LECs to the security list of the specified to Security List ELAN for the current session with the Accept join privilege. Use this

command to initialize the ELAN security list.

Command Actions

Enter menu sequence:	(2) LEM: LAN Emulation
	(3) SEC: LE Security Configuration
	(2) STB: Security tables entries
	(3) CUR: Add curr. conn. LECs
Enter a parameter at the prompt
Parameter	Format or Range
ELAN ID	1–16
	See “Display ELAN Parameters in LES Database” on
	page 283.
Direct access sequence:	2 3 2 3 [parameters]
Command Result
System action taken:	The currently–connected LECs are added to the ELAN
	security list.
System message display:	Active LECs added into security table
	successfully

Example

Enter: 2 3 2 3 1

The following message is displayed:

Active LECs added into security table successfully

The currently connected LECs are added to the ELAN security list for the

ELAN with ID 1.