3Com 9000 manual System responds with the confirmation, Parameter Format or Range

258CHAPTER 9: MANAGING LAN EMULATION

Add ELAN ATM Add an ELAN ATM address for a specified ELAN ATM address database. Address This database is disconnected from the real database.

Command Actions

Enter menu sequence:	(2) LEM: LAN Emulation
	(1) LCS: LE Configuration Service
	(5) LNT: LECS Network topology
	(5) ATM: ATM Address Info
	(3) ADD: Add new ATM address
Enter a parameter at the prompt
Parameter	Format or Range
ELAN name	Up to 32 characters. For more information, see “Add
	ELAN” on page 259.
ATM Address	20 Hex bytes separated by dots
Direct access sequence:	2 1 5 5 3 [parameters]
Command Result
System action taken:	The ATM address for the selected ELAN is added to the
	debug mode ATM address database.
System message display:	ATM address was added to this elan.

Example

Enter: 2 1 5 5 3

elan_73_9 47.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0

The system responds with the confirmation:

ATM address was added to this elan.