BIOS SETUP
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that depends on certain BIOS calls to access memory. The default setting is
Console Redirection
Set the Console Redirection from COM port to UNIX terminal on BIOS boot up. By default, the setting is enabled.
Baud Rate
The default value of the Baud Rate is 19200.
Agent Connect Via
By default, this item is set to NULL.
Agent Wait Time (min)
By default, the Agent Wait Time is set to 1 minute.
Agent After Boot
By default, this field is disabled.
Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select Enabled to release IRQ6. This is required to pass Windows 95/98's SCT test. You should also disable the Onboard FDC Controller in the Integrated Peripherals screen when there's no floppy drive in the system. If you set this feature to Disabled, the BIOS will not report the missing floppy drive to Win95/98.
Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the system is boot up. The default setting is enabled.
34 | MB893 User’s Manual |
