Mount the 3M-22, Install AAA Batteries | Lux Products instruction

Wall

Mount the 3M-22

•Hold the 3M-22 against the wall, with the wires coming	3M-22
over the top above terminal block. The 3M-22 will cover the
hole in the wall.
•Position 3M-22 for best appearance. Use the optional stand-
offs if more space for wires is needed behind the 3M-22.	Wires
•Attach the base to the wall with the screws provided.
•If you are mounting the base to sheet rock or if you are using
the old mounting holes, use the plastic anchors provided. Drill
a 3/16-in.(4.8mm) hole for the insert at
each screw location, then mount the base.
W
W	Wall anchor
	Wall anchor
	PG 9

•The 3M-22 requires 2 AAA batteries to operate .

•Switch MODE switch to OFF and the FAN switch to AUTO.

•Install 2 AAA alkaline batteries according to the polarity noted in the compartment. LCD segments will go on.

•Press the RESET button (under top cover) to clear transient program memory. NOTE: Replace the batteries when this LOW

battery indicator appears on the display or once a year.

•Replace top and bottom covers on unit.