Memorex MD6457CP manual To Program the Memory UP to 24 Tracks

MD6457.O/M.QXD 7/15/03 12:12 PM Page 11

CD OPERATION (CONTINUED)

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)

1			2	1
			3
With	a	CD	inserted,	press	the

PLAY/PAUSE ( )/POWER ON button ❶ to turn the unit on and press the STOP (■)/POWER OFF button ❷ to stop auto playback. Press the PROG button ❸; the PROG indicator will blink in the CD display.

2
1	2
	3

Select the first track to be played back

using the SKIP/SEARCH ❶ or

❷button, then press the PROG button

❸ again. Repeat this step to program additional tracks up to a maximum of 24 tracks.

3		1
	3	2

4
1	2

Press the PLAY/PAUSE ( ) /POWER ON button ❶ to begin Programmed playback and adjust the VOLUME control ❷ and DBBS switch

❸as desired.

To skip forward or backward through the programs, press the

SKIP/SEARCH ❶ or ❷ button. When the disc is through playing, it will stop.

NOTES:

•Press the STOP (■)/POWER OFF button to stop the disc before it is finished.

•As each program is played, the track number is shown in the display.

•To clear the memorized program: press the STOP (■)/POWER OFF button again while in the stop mode, wait approximately 60 seconds and the unit will turn off or open the CD compartment.

•Programming is the ability to preselect the order in which a series of tracks will be played.

•Each track may be stored in the program memory as many times as desired (up to 24 tracks).

11