Lux Products TX9000TS warranty Programming

4.9. SOFTWARE RESET

This reset is disabled while the touchscreen is locked. When activated it will reset all programmable values and settings including the lock code and clock, to their default values. Then option switch positions will be read before resuming normal operation. Record your settings and programs before pressing this button.

NOTE:

•Take care not to inadvertently press the SOFTWARE RESET button while programming your unit.

•Performing a SOFTWARE RESET will reprogram all software settings to their default values.

•Copy your programs into the blank chart provided on page 12 before using SOFTWARE RESET to assist reprograming.

4.10. SETTING THE DAY AND TIME

SET DAY: Touch displayed DAY, advance with UP arrow.

Touch displayed DAY again to return to main screen.

SET TIME: Touch displayed time, set with UP or DOWN arrows. Touch displayed time again to return to main screen.

DAY and TIME may also be set from their menu as follows:

•Touch MENU. You should see Set Day/Time displayed.

•Touch YES and day of the week will flash.

•Touch UP ARROW to advance to set the day.

•Touch YES to accept displayed week day and advance to SET TIME. Or touch NEXT to advance to set current time without accepting changes. Time will be flashing.

•Touch UP/DOWN ARROW to set the current time of day.

•Touch YES to accept displayed time.

•Touch EXIT to return to the main screen, or touch NEXT to rotate back to SET THE DAY.

4.11. TEMPORARY TEMPERATURE OVERRIDE

Temporary temperature override allows you to change the current Set Temperature in Heat or Cool until the next program period without changing your temperature control programs.

•Touch displayed temperature; the screen will flash your SET TEMPERATURE. UP/DOWN arrows will become visible.

•Use UP/DOWN arrows to change the temperature setting while it is flashing. OVERRIDE will be indicated at the top of the display.

•OVERRIDE will be automatically canceled at the start of the next program period.

•OVERRIDE will be cancelled if the set temperature is adjusted to its programmed value or if the units mode is changed.

4.12. TEMPERATURE HOLD

HOLD may be used for manual temperature control. It is the simplest means to set and maintain a fixed temperature in Heat or Cool, without concern for programming.

•Touching HOLD toggles the unit into or out of the hold mode with the current status indicated in the display. In HOLD adjust temperature as desired.

•Temperature settings will only change manually while HOLD is active. To clear hold, touch HOLD again.

5. PROGRAMMING

The TX9000TS provides four independent programming periods per day. Heat and Cool are programmed separately. You can use the default programs or alter them to suit your schedule.

5.1.DEFAULT ENERGY STAR® TEMPERATURE PROGRAMS

To review the programs select Heat or Cool mode, touch MENU and then use SCROLL to see HEAT or COOL PROGRAM. Touch YES to enter HEAT or COOL PROGRAM. Use NEXT to step through each period and its set temperature. You can use the built-in programs as shown, or change them as you wish. Touch EXIT to return to the main display. Each day is divided into four periods. Each period has its own starting time and temperature.

The default programs are given in the following table:

PERIOD	HEAT MODE	COOL MODE
MORN	6:00 AM 700F (210C)	6:00 AM 780F (260C)
DAY	8:00 AM 620F (170C)	8:00 AM 850F (290C)
EVE	6:00 PM 700F (210C)	6:00 PM 780F (260C)
NITE	10:00 PM 620F (170C)	10:00 PM 820F (280C)

Pressing the S. RESET button restores these heating and cooling programs and all other default settings.

5.2. PROGRAMMING THE UNIT

You can change any preset times and/or temperatures to suit your schedules for HEAT and COOL during each period of each day of the week. A blank programming chart is provided for you to record your temperature settings in that chart (See PAGE 12).

5