Bryant TZEMT400AB32MAA manual Enroll Thermostat into Schlage LiNKTM System

Page 10

Enroll Thermostat into Schlage LiNKTM System

21 Prepare the bridge for enrollment.

a. Unplug Ethernet and power cables from bridge.

b. Verify that blue light is blinking. If blue light is solid, battery is dead. c. Install a quality 9 volt battery.

d. Take bridge to the location where the thermostat is mounted.

22 Enroll the thermostat into the bridge.

If you are using a controller that is not a Schlage LiNKTM bridge, consult the instructions that came with the controller to fi nd out how to enroll a new device.

a.Hold the bridge within 6 feet (1.8 meters) of the thermostat

throughout all of step 2.

Important Note: After you begin the enrollment process, you have

 

30 seconds to complete the remainder of the steps. Study the steps

Gateway

below before beginning.

b.Press and release the plus (+) button on the bridge.

c.Press the MENU button on the thermostat.

d.Scroll down to Z Wave Install, and press the Select button.

e.Press the Yes button to enroll the thermostat.

f.Observe the lights on the bridge. The orange light will blink while enrollment is taking place. Enrollment is complete when the orange light becomes solid.

11:15

AM

 

MENU

Outside

60

75

MODE

FAN

76

H

74

C

RUN

11:15 AM Outside 60

75 7674 HC

MENU MODE FAN RUN

Menu Selection

User Settings

Usage Graph

ESM Setpoints

ZWave Install

Done

Select

Scroll down

MENU button

Select button

23 Verify enrollment of the thermostat.

a.Press the MENU button on the thermostat.

b.Scroll down to Thermostat Info, and press the Select button.

c.Look at the number listed after ZNID.

If the number listed there is anything other than “000”, the thermostat has been successfully enrolled.

If the number listed there is “000”, the thermostat has NOT been successfully enrolled. In this case, repeat step 22 and verify again.

Thermostat Info

TZEMT400AB32

Ver: 01.00.10

ZVER:02.00.0

ZNID: 013

ZHID: 01.07.37.a7

 

 

 

System Type:

Standard

Fan Type:

Gas

 

 

 

 

 

 

 

 

Done

 

 

 

 

 

ZNID

Press Done button when fi nished.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Thermostat Guide If your existing thermostat is battery powered Physical Installation and WiringWire colors Letters may vary Identify your System Type from the list below Remove existing wall plateInstall new wall plate Mark two mounting holes using new wall platePrepare two mounting holes Themostat Brand Wire Labels Review the wiring chart informationConnects to Turn power to heating and cooling system back on Attach all wires securely to the new thermostatIf necessary, cut the internal jumper wire JP1 Attach the thermostat face to the wall plateIf your System Type is System Settings at ThermostatSet Time and Date If your Gas or Electric furnace system also has19B Electric Furnace Mechanical Settings 19C Heat Pump Mechanical SettingsTest Cooling Operation if your system has cooling Perform System CheckoutTest Heating Operation if your system has heating Enroll the thermostat into the bridge Enroll Thermostat into Schlage LiNKTM SystemPrepare the bridge for enrollment Verify enrollment of the thermostatEstablish Online Control of the Thermostat

TZEMT400AB32MAA specifications

The Bryant TZEMT400AB32MAA is a versatile and advanced thermostat designed to enhance the control and efficiency of heating and cooling systems in modern homes. With its user-friendly interface and a rich set of features, this smart thermostat offers a seamless way to manage indoor climate.

One of the primary features of the TZEMT400AB32MAA is its Wi-Fi connectivity, allowing homeowners to control their heating and cooling systems remotely through a smartphone app. This ensures that you can adjust your home’s temperature from anywhere, providing comfort before you arrive and saving energy when you’re away. The app is compatible with both iOS and Android devices, making it accessible for a wide range of users.

The thermostat also boasts a large, easy-to-read color display that presents information clearly. It shows the current temperature, set point, and operational mode, making it simple to monitor your system at a glance. The intuitive touchscreen interface allows for quick adjustments and programming, eliminating the need for complex navigation.

Another significant feature is its programmable scheduling capabilities. Users can create personalized schedules for different days of the week, optimizing energy savings and comfort based on daily routines. The TZEMT400AB32MAA can store multiple schedules, which can be easily adjusted or overridden as needed.

The smart thermostat also employs advanced energy-saving technologies, including learning algorithms that adapt to your preferences over time. This means the thermostat can automatically adjust settings based on your habits, ensuring optimal energy usage without sacrificing comfort.

Additionally, the Bryant TZEMT400AB32MAA supports multi-stage heating and cooling systems, making it suitable for various HVAC configurations. It is designed with compatibility in mind, working seamlessly with gas, oil, electric, and heat pump systems, including backup heating.

Moreover, it features smart alerts and reminders, notifying users of filter changes or maintenance needs, which can prolong the life of the HVAC system and maintain its efficiency.

In summary, the Bryant TZEMT400AB32MAA represents a significant advancement in home temperature control technology. With its smart features, user-friendly interface, and energy-saving capabilities, it provides homeowners with a reliable solution for managing their indoor climate efficiently and conveniently. Whether you’re looking to save on energy bills or simply enjoy a more comfortable living space, this thermostat offers the perfect blend of innovation and practicality.
Top Page Image Contents