Applications, Supplied Parts | Aube Technologies TH133, TH131

PB130-024T

Installation Instructions

24-V Low-Voltage Power Base

nApplications

4.1Single SSR with Built-in Transformer

This document describes the connections when the PB130-024T power base is used on any TH13x series thermostat. This low-voltage power base can be connected to a line-voltage load using a relay or directly to a 24-volt device. The PB130-024T is compatible with most relays; however, the following Aube relays are optimized for use with this power base:

•RT850 solid-state relay (SSR)

•RT850T solid-state relay (SSR) with built-in 24-V transformer

•RC840 electromechanical relay

•RC840T electromechanical relay with built-in 24-V transformer

Electrical
Panel	Blue	Red
	Blue	Red

BlackHeater

4.2Multiple SSRs with External Transformer

oSupplied Parts

nOne (1) power base o Two (2) plastic anchors p Two (2) mounting screws

pInstallation Guidelines

For a new installation, choose a location about 1.5 m (5 ft.) above the floor.

Electrical

Panel

	Black	External 24 V
		Transformer
Heater	Red
Heater

Black

The thermostat must be installed on an inside wall facing the heating system (except for floor heating systems).

Heater

Red

Avoid locations where there are air drafts (top of staircase, air outlet), dead air spots (behind a door), direct sunlight or concealed chimney or stove pipes (except for floor heating systems).

qInstallation Procedure

The installation must be carried out by an electrician and must comply to local electrical codes.

nTurn off power to the heating system at the main electrical panel to avoid electrical shock.

oWire the base according to your application. See typical wiring diagrams in sections 4.1 to 4.4.

4.3Electromechanical Relay with External Transformer

Electrical

Panel

External 24 V

Transformer

Heater

4.4Hot Water Heater Valve

Electrical

Panel

p For a floor heating system installation, con- nect the floor sensor between the S and R ter- minals.

qSecure the base to the wall using the provided screws and wall anchors.

rConfigure the switches located on the control module (if any). Refer to the user guide.

sInstall the control module onto the base. t Apply power to the heating system.

uVerify the installation by checking that the heating system can be turned On or Off using the thermostat.

External 24 V	Valve
External 24 V
Transformer

rTechnical Specifications

Maximum load: 0.5 A / 24 VAC

Operating temperature: 0°C to 50°C (32°F to 122°F)

Storage: -20°C to 50°C (-4°F to 122°F)

Size (H • W • D): 75 x 75 x 13 mm (2.9 x 2.9 x 0.5 in)

Wire gauge: 14 to 22 AWG

PB130-024T

400-130-002-C

1/11/06

1/1

TH133, TH131 specifications

Aube Technologies, a recognized pioneer in heating and temperature management solutions, has brought forth advanced models, namely the TH133 and TH131, aimed at residential heating applications. These thermostats are designed to enhance energy efficiency, comfort, and ease of use, catering to the modern homeowner's needs.

The TH133 model is characterized by its digital interface that allows users to program their heating schedule easily. It features a large backlit display, making it simple to read temperature settings, even in low-light conditions. One of the main highlights of the TH133 is its adaptive learning feature, which learns the homeowner's habits over time. This feature enables the thermostat to adjust heating patterns based on when the home is occupied, effectively optimizing energy consumption while maintaining comfort.

Another key technology integrated into the TH133 is its dual voltage compatibility, allowing it to be used with a variety of heating systems, including electric baseboards and convectors. The unit is equipped with an energy-saving mode that can be engaged during periods of absence, further reducing energy costs without sacrificing living comfort. With the TH133, users also benefit from customizable heating schedules, allowing them to set different temperatures for weekdays and weekends.

Turning to the TH131, this model also boasts a user-friendly interface, but it is slightly more basic compared to its counterpart. It features a simple digital display and manual programming options that cater to homeowners who prefer straightforward operation over advanced features. The TH131 is equally capable of managing various heating systems, thanks to its versatile voltage options, which range from 120 to 240 volts.

Both models are designed with easy installation in mind, featuring a standard size that fits most electrical boxes. Their sleek and modern designs ensure that they integrate seamlessly into any home décor, making them both functional and visually appealing.

Overall, Aube Technologies’ TH133 and TH131 thermostats offer a range of features that enhance user experience while promoting energy efficiency. With advanced technologies suited to different user preferences, these thermostats represent a significant advancement in home heating management.