Introduction, Operation, Installation | Aube Technologies TH113 F

together as per FIGURE 1.

box) to the base.

Installation Instructions

MASTER THERMOSTATS	SLAVE UNITS
TH113-A/F/AF (12VDC)	CT230-120GA
TH114-A/F/AF (12VDC)	CT230-120GB
TH115-A/F/AF (12VDC)	CT230-240GA
TH116-A/F/AF (12VDC)	CT230-240GB

1. Introduction

This master and slave unit system is specially designed for large floor heating applications exceeding 15 A.

The master thermostat controls a single or multiple floor heating zones driven by slave units. The master thermostat can control up to 10 slave units.

Each slave unit drives its own zone and is equipped with a GFCI test button and warning light as well as an On/Standby switch to facilitate maintenance on specific zones of the floor installation.

2. Operation

Master Thermostat

The master unit controls the temperature and sends a signal to slave units when heating is required. The floor sensor is connected to the master unit. The master unit is powered by the slave units.

Slave Unit

The slave unit receives the signal sent by the master unit and activates its load.

NOTE: There must be a minimum of one slave unit ON to power the master unit.

3. Installation

Turn off power to the heating system at the main power panel to avoid electrical shock. Installation should be carried out by an electrician.

3.1 Wiring Guidelines

•The wire distance between the master thermo- stat and slave unit should not exceed 500 ft. (150 m).

•The floor sensor cable should not exceed 200 ft. (60 m).

•A 3-wire 20 AWG cable is recommended.

3.2 Slave Units - Installation and Wiring

The slave units can operate on different voltages (e.g. 5 units @ 120 V and 5 @ 240 V).

•Required parts: CT230-120GA, -120GB, -240GA or -240GB

•Installation: On an electrical box

•Location: Installation near the master thermostat is not required (i.e. can be installed in a utility room).

•Wiring: The power bases are joined

through a daisy chain connection.

n Connect the 120 V or 240 V power base wires to the power (line) and to the load (floor) using solderless con- nectors for copper wires, and secure the base to the electrical box.

oAffix the wiring sticker (in the CT230

p Connect the slave power bases

q Once installation and wiring is com- plete, mount the CT230 interface:

a) Align the bracket tabs of the CT230 with the holes located on top of the power base.

b)Secure the CT230 interface using the screw (captive).

rSwitch all slave power bases to STANDBY by sliding the protective door upwards and positioning the switch to STANDBY.

Install and connect the master unit (see 3.3).

FIGURE 1

Connections

400-230-000-C 5/12/05 1/2

TH113 AF, TH116 A, TH113 F, TH116 F, TH116 AF specifications

Aube Technologies has established itself as a leader in smart temperature control solutions, particularly with its range of programmable thermostats. Among these, the TH116 AF, TH116 F, TH113 F, TH116 A, and TH113 AF models stand out due to their unique features and innovative technologies designed for efficient heating regulation in both residential and commercial settings.

The TH116 AF model is designed primarily for electric floor heating systems. Its advanced adaptive control technology allows for real-time temperature regulation, enhancing comfort and energy savings. The user-friendly interface provides easy access to programming options, allowing users to set different temperature profiles for various times of the day. This model is especially popular for its compatibility with various floor heating technologies.

The TH116 F model is tailored for fans or convector systems, making it a versatile choice for different heating appliances. It features a built-in programming function which allows homeowners to customize heating schedules, ensuring that spaces are warm when needed without excessive energy consumption. The anti-frost setting is a notable characteristic, helping to prevent temperatures from dropping too low during winter months.

Meanwhile, the TH113 F thermostat is known for its simplicity and effectiveness, making it ideal for users who prefer straightforward functionalities. It offers a non-programmable option, yet still maintains reliable temperature control. This model includes features such as a large display for easy reading and straightforward temperature adjustment buttons.

The TH116 A model is equipped with a variety of programmable options and an intuitive interface, suitable for a range of heating systems, including electric baseboards. It supports smart heating with an eco-mode for energy-conscious users, enabling them to enjoy significant savings on energy costs.

Lastly, the TH113 AF, also known for its simplicity, includes features like a comfortable display and straightforward programming options. It stands out for its compatibility with both electric and hydronic heating systems, making it a practical solution for various heating needs.

In summary, Aube Technologies’ range of thermostats, including the TH116 AF, TH116 F, TH113 F, TH116 A, and TH113 AF models, offers a mix of advanced features and user-friendly designs. Each thermostat comes with specific functionalities tailored to different heating systems, ensuring efficient climate control and energy management for an enhanced living experience.