Aprilaire 8910 Power & Reset options, Setup & Testing, Equipment Type Selection Switch SW1

Page 6

Power & Reset options

The equipment control module is powered from 24VAC.. The thermostat is powered from the equipment interface module and has a battery back-up option for the clock..

The thermostat has a memory backup that saves the thermostat settings in case of a power interruption.. The system settings will be retained but the clock will reset after 90 seconds with no battery or equipment control module power..

The reset button located under the battery cover can be used to reset the thermostat to factory defaults.. The system settings will also be reset to default..

RESET

BUTTON

Setup & Testing

EQUIPMENT TYPE SELECTION SWITCH (SW1)

This Home Comfort Control has the option of being used in heat pump or heat/cool systems.. Switch SW1 located on the back of the thermostat’s face is used to select this option.. This setting is displayed in the Installer System Settings under Equipment Type..

Note: Home Comfort Control reboots within 10 seconds after switch position is changed..

HC

SW1

HEAT/COOL

HP

 

HEAT PUMP

 

HC

 

HP

Installer setup menu

How to enter the installer setup menu AND SELECT EQUIPMENT TO SETUP:

In the Installer Setup, HVAC or Indoor Air Quality setup can be selected. If Indoor Air Quality setup is selected, the user can then select to set up Air Cleaning, Humidification, Dehumidification or Ventilation.

Press [MODE] to set system to OFF..

Press [MENU] to enter main menu..

Press and hold [SETUP] for seven seconds, [INSTALL SETUP] appears..

Press [INSTALL SETUP] to enter installer setup menu..

Change System Settings

SETTINGSETTING

DESCRIPTION NUMBER

SETTING

OPTIONS

Press or to adjust the option.

Press [MENU] to exit.

Press [NEXT] to select option..

If IAQ (Indoor Air Quality) was selected, Press or to adjust the Outdoor Sensor setting or IAQ (Indoor

Air Quality) option..

Press [NEXT] to select Outdoor Sensor setting or IAQ (Indoor Air Quality) option..

System Settings can now be changed..

Press [NEXT] or [BACK] to page through the settings..

Press or to adjust the setting.

Press [DONE] to save and exit, or [CANCEL] to exit without saving..

The thermostat will discard changes and exit if nothing is pressed within 60 seconds..

To reset the installer settings to the default, reset the thermostat by pressing the [RESET] button for 5 seconds..

10

11

Image 6
Contents Safety Installation Instructions Table of contentsInstallation Outdoor temperature sensor should be mounted Equipment Control Module WiringOutdoor temperature sensor Optional wireless Outdoor temperature sensorC can be Powered from Return Air Temperature Sensor OptionalLeaving Air Temperature Sensor Optional Powered 24VACIndoor Air Quality Wiring Diagrams ThermostatEquipment Type Selection Switch SW1 Power & Reset optionsSetup & Testing Change System SettingsHvac Installer System Settings Table Humidifier System Settings Table Indoor Air Quality System SettingS TablesAir Cleaning System Settings Table Dehumidifier System Settings TableSystem test menu Ventilation System Settings TableHow to enter the system test menu System Test StepsSystem test Tables AuxMain Menu Quick Reference to controls & DisplayHome Screen Y3/OTroubleshooting Error CodesHome Comfort Control Features Specifications EnvironmentElectrical
Related manuals
Manual 19 pages 635 b

8910 specifications

The Aprilaire 8910 is a state-of-the-art thermostat designed to provide homeowners with precise control over their indoor climate. This smart thermostat is equipped with advanced features that enhance comfort while promoting energy efficiency.

One of the standout features of the Aprilaire 8910 is its intuitive touchscreen interface. The large, easy-to-read display allows users to navigate through a variety of settings with ease. The touchscreen is responsive and provides a seamless user experience, making it simple to adjust temperature settings or program schedules.

The Aprilaire 8910 supports both heating and cooling systems, offering flexibility for homeowners with diverse HVAC setups. It is compatible with forced air, heat pump, and radiant systems, as well as multi-stage heating and cooling setups, making it a versatile option for any home.

One of the key technologies integrated into the Aprilaire 8910 is its ability to manage humidity levels. The thermostat works in conjunction with whole-home humidifiers and dehumidifiers, allowing users to maintain optimal humidity levels for health and comfort. This feature is particularly beneficial in climates where humidity fluctuations can lead to discomfort or damage to home interiors.

The 8910 also boasts Wi-Fi connectivity, enabling remote access and control through a smartphone app. This feature allows homeowners to monitor and adjust their home's temperature and humidity levels from anywhere, ensuring comfort upon returning home. The app provides real-time updates and alerts, helping users stay informed about their HVAC system’s performance.

Another notable characteristic of the Aprilaire 8910 is its energy-saving capabilities. The thermostat offers programmable and adaptive scheduling options, allowing users to set different temperature schedules for weekdays and weekends. This reduces energy consumption and helps lower utility bills, all while maintaining a comfortable living environment.

With a sleek design and high-quality build, the Aprilaire 8910 is not only functional but also aesthetically pleasing. It can blend seamlessly with any home decor, making it an attractive addition to any wall.

In summary, the Aprilaire 8910 is a sophisticated thermostat that combines user-friendly technology with energy-efficient features. Its touchscreen interface, humidity control, Wi-Fi connectivity, and energy-saving programming make it a top choice for homeowners seeking ultimate comfort and convenience in climate control.