Summary, Installation | Aube Technologies TH102D instruction

MODEL TH102D

SUMMARY

!OPTIONS SELECTION

To change the temperature from °C to °F and back, maintain DAY buton pressed down as RESET button is being pressed on and released. Then release DAY button.

To change the time format from 24 hrs. to 12 hrs. and back, maintain HOUR button pressed down as RESET button is being pressed on and released. Then release HOUR button.

To change the heating control from proportional to on/off and back, maintain MIN button pressed down as RESET button is being pressed on and released. Then release MIN button.

! TO SET TIME AND DAY
Press on DAY, HOUR and MIN buttons to adjust time and day.
! TO RECORD THE HEATING PROGRAMS
Set the operating mode to AUTO. Use the PGM button to select the
program to be recorded or modified. Once the program is selected,
use HOUR and MIN buttons to set time and	or	to select
temperature setting.
! TO RECORD THE ECONO PROGRAMS

INSTALLATION

Note: The "Problems and Solutions" section at the end of this user's guide will help you to correct your problems during the installation.

This thermostat has been designed to operate with any installation which has a RESISTIVE load not exceeding 2500 W @ 240 VAC or 1250 W @ 120 VAC such as electric baseboards, radiant ceilings and floors, electric convectors, etc. It is not compatible with a low voltage controller used by a central heating system or systems using a contactor or a relay whose current is under 1.0 A.

Electricians or experienced technicians should install the thermostat.

This thermostat is designed to be used with a self-protected heating system equipped with thermal cut off and circuit breaker.

PARTS INCLUDED

-One (1) TH102D thermostat

-Two (2) 6-32 screws, 1 ½ inches

-Two (2) solderless connectors

TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK. Keep air vents of thermostat clean and free from obstructions.

1) Connecting wires and mounting thermostat

Connect the rear thermostat wires to the power supply and to the electric heater wires using solderless connectors for copper wires (there is no polarity for the wires). See schematic diagram.

Set the operating mode to ECONO. Use the PGM button to select the
program to be recorded or modified. Once the program is selected,
use DAY, HOUR and MIN buttons to set time and	or	to select
temperature setting.
! OPERATING MODES
To select an operating mode, use MODE button.

AUTO:	Runs the program.	or	shows temperature setting
	and can override temporarily your programming.
MAN:	Maintain the selected temperature.			or	change
	the temperature setting.

ECONO: Maintain a temperature setting up to the user's pre-

programmed day and time. or shows temperature setting and can override temporarily your programming.

2-wire installation :

120 / 240 VAC

Line

4-wire installation :

120 / 240 VAC

Line

Solderless connector for copper wires

Electric baseboard

Solderless connector for copper wires

Electric baseboard

NOTE: To access the programmable keyboard, remove the cover by placing your fingers to the right side of the thermostat and pull toward you.

Push the excess wire back into the electrical box to prevent interference with the thermostat. Secure the thermostat using the supplied screw. Once the thermostat is properly installed, return power to heating system.

Note 1 : All cables and connections must conform to the local electrical code.

Note 2 : In normal use at full capacity (2500 W), the housing temperature of the thermostat can reach 35 to 40 °C.

WARNING : Special CO/ALR solderless connectors must be used when connecting with aluminum conductors.

2) Options selection

Some options have been factory set. Those default settings are :

•The temperature is in °C, the heating control is proportional and the time format is 24 hrs.

2.1 Temperature displayed in °C or °F

To change the temperature from °C to °F and back, maintain DAY button pressed down as RESET button is being pressed on and released. Then release DAY but- ton.

2.2 Time format displayed in 24 hours or 12 hours

To change the time format from 24 hrs. to 12 hrs. and back, maintain HOUR but- ton pressed down as RESET button is being pressed on and released. Then release HOUR button.

720-102002-A 1/4

TH102D specifications

Aube Technologies, a prominent player in the field of temperature control solutions, presents the TH102D, an advanced digital thermostat designed for precise temperature regulation in residential and commercial applications. This innovative device combines state-of-the-art technology with user-friendly features to enhance the comfort and efficiency of heating and cooling systems.

One of the standout features of the TH102D is its advanced programmable functionality. Users can easily set different temperature profiles for weekdays and weekends, allowing for optimal management of energy consumption. The built-in scheduling capabilities enable users to tailor heating or cooling to their specific needs, ensuring maximum comfort while minimizing energy costs.

The TH102D also boasts an intuitive digital display, which provides clear and easy-to-read temperature information. This feature simplifies temperature adjustments and allows users to monitor their settings at a glance. The interface is designed for both functionality and convenience, offering an effortless user experience.

Additionally, the TH102D incorporates Aube's innovative temperature control algorithms, which continuously assess the room's temperature and adjust the system's output accordingly. This ensures a stable indoor climate by eliminating temperature fluctuations and providing a more consistent environment.

Moreover, the thermostat is compatible with a wide range of HVAC systems. Whether for electric heating, hydronic heating, or central air conditioning, the TH102D integrates seamlessly to enhance system performance. Its versatility makes it an ideal choice for diverse applications, catering to varying heating and cooling requirements.

Energy efficiency is another hallmark of the TH102D. By optimizing heating and cooling cycles based on the programmed schedule, the thermostat helps reduce overall energy consumption. This not only lowers utility bills but also contributes to a more sustainable environment.

For installation and maintenance, the TH102D is designed with user convenience in mind. The product includes a straightforward installation process, accompanied by comprehensive instruction manuals that guide users through setup. In addition, its durable construction ensures longevity and reliability in any setting.

In summary, the Aube Technologies TH102D digital thermostat is a powerful tool for enhancing temperature control in both residential and commercial environments. With features such as programmable settings, an intuitive display, compatibility with multiple HVAC systems, and energy-saving capabilities, the TH102D stands out as a top choice for those seeking comfort and efficiency in temperature management.