Aube Technologies TH102-3 manual Summary, Installation, Connecting wires and mounting thermostat

Page 1

MODELS TH102 & TH102-3

SUMMARY

‹OPTIONS SELECTION

To change the temperature from °C to °F and back, maintain DAY buton pressed down as RESET button is being pressed on and released. Then release DAY button.

To change the time format from 24 hrs. to 12 hrs. and back, maintain HOUR button pressed down as RESET button is being pressed on and released. Then release HOUR button.

To change the heating control from proportional to on/off and back, maintain MIN button pressed down as RESET button is being pressed on and released. Then release MIN button.

‹ TO SET TIME AND DAY

 

 

Press on DAY, HOUR and MIN buttons to adjust time and day.

 

‹ TO RECORD THE HEATING PROGRAMS

 

 

Set the operating mode to AUTO. Use the PGM button to select the

program to be recorded or modified. Once the program is selected,

use HOUR and MIN buttons to set time and

or

to select

temperature setting.

 

 

‹ TO RECORD THE ECONO PROGRAMS

 

 

INSTALLATION

Note: The "Problems and Solutions" section at the end of this user's guide will help you to correct your problems during the installation.

This thermostat has been designed to operate with any installation which has a RESISTIVE load not exceeding 2500 W @ 240 VAC or 1250 W @ 120 VAC such as electric baseboards, radiant ceilings and floors, electric convectors, etc. It is not compatible with a low voltage controller used by a central heating system or systems using a contactor or a relay whose current is under 1.0 A.

Electricians or experienced technicians should install the thermostat.

This thermostat is designed to be used with a self-protected heating system equipped with thermal cut off and circuit breaker.

PARTS INCLUDED

-One (1) thermostat

-Two (2) 6-32 screws, 1 ½ inches

-Two (2) solderless connectors

TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK. Keep air vents of thermostat clean and free from obstructions.

1) Connecting wires and mounting thermostat

Connect the rear thermostat wires to the power supply and to the electric heater wires using solderless connectors for copper wires (there is no polarity for the wires). See schematic diagram.

Set the operating mode to ECONO. Use the PGM button to select the

program to be recorded or modified. Once the program is selected,

use DAY, HOUR and MIN buttons to set time and

or

to select

temperature setting.

 

 

‹ OPERATING MODES

 

 

To select an operating mode, use MODE button.

 

 

AUTO:

Runs the program.

or

shows temperature setting

 

and can override temporarily your programming.

MAN:

Maintain the selected temperature.

or

change

 

the temperature setting.

 

 

 

ECONO: Maintain a temperature setting up to the user's pre-

programmed day and time. or shows temperature setting and can override temporarily your programming.

2-wire installation :

120 / 240 VAC

Line

4-wire installation :

120 / 240 VAC

Line

Solderless connector for copper wires

Electric baseboard

Solderless connector for copper wires

Electric baseboard

NOTE: To access the programmable keyboard, remove the cover by placing your fingers to the right side of the thermostat and pull toward you.

Push the excess wire back into the electrical box to prevent interference with the thermostat. Secure the thermostat using the supplied screw. Once the thermostat is properly installed, return power to heating system.

Note 1 : All cables and connections must conform to the local electrical code.

Note 2 : In normal use at full capacity (2500 W), the housing temperature of the thermostat can reach 35 to 40 °C.

WARNING : Special CO/ALR solderless connectors must be used when connecting with aluminum conductors.

2) Options selection

Some options have been factory set. Those default settings are :

The temperature is in °C, the heating control is proportional and the time format is 24 hrs.

2.1 Temperature displayed in °C or °F

To change the temperature from °C to °F and back, maintain DAY button pressed down as RESET button is being pressed on and released. Then release DAY but- ton.

2.2 Time format displayed in 24 hours or 12 hours

To change the time format from 24 hrs. to 12 hrs. and back, maintain HOUR but- ton pressed down as RESET button is being pressed on and released. Then release HOUR button.

400-102-000-A 1/4

Image 1
Contents Connecting wires and mounting thermostat InstallationSummary Options selectionProgramming Operating ModesCharacteristics CharacteristicsRecording the heating programs Recording the Econo programsProblems and Solutions WarrantyAube Technologies INC. ONE 1 Year Limited Warranty

TH102-3, TH102 specifications

Aube Technologies is a notable player in the field of home automation and energy management solutions, and its TH102 and TH102-3 models are exemplary devices in their product lineup. These thermostats are designed to provide efficient temperature control while ensuring convenience and energy savings for homeowners.

The Aube Technologies TH102 is a programmable electronic thermostat suitable for electric heating systems. It provides users with complete control over their heating environment, allowing for tailored temperature settings that can accommodate varying schedules and lifestyles. Its user-friendly interface enables easy programming and operation. The TH102 features a sleek design that fits seamlessly into any modern home decor.

One of the standout features of the TH102 is its programmable capabilities. Users can program different temperature settings for various times of the day and days of the week, creating a customized heating schedule. This flexibility leads to substantial energy savings, as the thermostat can automatically lower the temperature when homeowners are away or sleeping and raise it right before they return.

The TH102-3 variant takes the functionality a step further by accommodating three different heating modes: normal, economy, and vacation. This versatility allows users to adapt their heating preferences according to their needs—whether they are at home, away for an extended period, or seeking energy-efficient options.

Both models are equipped with advanced electronic control technologies that ensure precise temperature regulation. They feature a high-resolution LCD display that provides clear visibility of the current temperature and settings. Furthermore, these thermostats have the capability to respond quickly to temperature changes, ensuring a comfortable living environment.

Aube Technologies has also incorporated various safety features in the TH102 and TH102-3. These thermostats come with built-in overload protection to prevent overheating, ensuring safe operation in residential settings. They are designed to work seamlessly with most electric heating systems, making them highly compatible with existing setups.

In summary, Aube Technologies TH102 and TH102-3 are multi-functional thermostats that provide users with effective temperature control, energy savings, and enhanced convenience. With their programmable features, sleek designs, and advanced technologies, they offer an optimal heating management solution for modern homes. Whether for everyday use or extended getaways, these thermostats adapt to various lifestyles while prioritizing safety and efficiency.