Operating Modes, Programming | Aube Technologies TH102-3 specification

2.3 Proportional or ON/OFF heating control

This thermostat has been factory set to proportionally control electric baseboards, radiant systems and convectors. Since proportional control uses a fast commutation rate, it is not compatible with fan equipped systems (see characteristics). Also, this control mode could occasionally create light flickering, especially in rural area.

You can change the control mode to make it compatible with fan equipped systems or to eliminate the light flickering.

To do so, maintain MIN button pressed down as RESET button is being pressed on and released. Then release MIN button. Following this operation, the display will show the fan indicator. To return to proportional control, repeat the same operation.

3) Memory backup

In the event of a power failure, an internal circuit will maintain the programming. The display will stay on for 15 minutes. An indicator "LP" will be shown on the display. Beyond this period, the display will turn off. Only the time will have to be set if power failure is more than six hours. The thermostat will return to the same operation mode as set before the power failure.

ECONO

The ECONO mode has two (2) programs in which the day, the time and the setpoint has to be programmed. For instance, this operating mode can be used for a cottage installation where the user goes only on weekends.

Program 1: Friday 3:00 PM, 20 °C

Program 2: Friday 8:00 PM, 15 °C

The temperature will be maintained at 20 °C Friday from 3:00 PM to 8:00 PM, and maintained at 15 °C the rest of the week.

This gives you a comfortable temperature at your arrival and if you are not going to your cottage for the weekend, there will be only a minimal heating period.

To see the ECONO programs, select the ECONO operating mode and press on PGM button successively to see programs 1 and 2 appear on the display. In

ECONO mode, pressing on the or displays the temperature setting.

4) First power-up

When power is applied for the first time, the display must show the day and hour as follows:

0:00 MO (Monday)

The active operation mode is the framed MAN mode, the temperature setpoint is 20 °C and the ambiant temperature is displayed.

If the display is different, maintain PGM button pressed down as RESET button is being pressed and released. Then release PGM button.

500 WATTS OR LESS INSTALLATION

During the 30 minute period following the installation or a long power failure (more than 6 hours), the light intensity of the display decreases when a button is pressed on while the thermostat is in the heat mode. This problem will disappear when the accumulator for the memory backup will be charged.

OPERATING MODES

The thermostat has three (3) operating modes:

AUTO, MAN and ECONO.

They are selected through the MODE button. On display, the active mode is framed. The frame moves on to the next mode each time the MODE button is pressed on.

PROGRAMMING

1) Adjustment of time and day

Example of setting: Thursday 8:15 AM

Use DAY, HOUR and MIN buttons to set the time.

Once set, press on RET button to exit the time and day adjustment mode

Note 1 : Time indicator is showing you that the time must be set.

Note 2 : The thermostat has an automatic return. When such functions as time recording, programs recording, etc., are not completed by pressing on RET button, the thermostat will automatically exit the mode after 60 seconds.

2) Typical suggested programs

AUTO

MAN

The AUTOmatic mode runs in sequence (hourly) the programs recorded by the user.

Pressing on the or displays the temperature setting and the SETPOINT indicator for five (5) seconds.

To see the weekday and weekend programs, select the AUTO mode and press successively on PGM button to see the programs appear on the display.

The MAN mode allows the user to override the programming.

The first time the or is pressed on, the tempera- ture setting is displayed. For all subsequent times pressed on, the temperature setting will change 1 °C.

This thermostat can store up to four (4) daily programs for weekdays and four (4) daily programs for the weekend. Also, there is two (2) programs for the ECONO mode. To practice programming use the following example.

Program number	Time	Temperature setting

Weekday programs (Mon...Friday)
Program 1	6:30 AM	20 °C

Program 2	8:30 AM	15 °C
Program 3	4:30 PM	20 °C
Program 4	11:00 PM	15 °C
Weekend programs (Sat & Sun)
Program 1	7:00 AM	20 °C

Program 2	8:30 AM	15 °C
Program 3	4:30 PM	20 °C
Program 4	11:00 PM	15 °C

ECONO mode programs (weekend cottage)
Program 1	Friday 3:00 PM	20 °C
Program 2	Friday 8:00 PM	15 °C

400-102-000-A 2/4

TH102-3, TH102 specifications

Aube Technologies is a notable player in the field of home automation and energy management solutions, and its TH102 and TH102-3 models are exemplary devices in their product lineup. These thermostats are designed to provide efficient temperature control while ensuring convenience and energy savings for homeowners.

The Aube Technologies TH102 is a programmable electronic thermostat suitable for electric heating systems. It provides users with complete control over their heating environment, allowing for tailored temperature settings that can accommodate varying schedules and lifestyles. Its user-friendly interface enables easy programming and operation. The TH102 features a sleek design that fits seamlessly into any modern home decor.

One of the standout features of the TH102 is its programmable capabilities. Users can program different temperature settings for various times of the day and days of the week, creating a customized heating schedule. This flexibility leads to substantial energy savings, as the thermostat can automatically lower the temperature when homeowners are away or sleeping and raise it right before they return.

The TH102-3 variant takes the functionality a step further by accommodating three different heating modes: normal, economy, and vacation. This versatility allows users to adapt their heating preferences according to their needs—whether they are at home, away for an extended period, or seeking energy-efficient options.

Both models are equipped with advanced electronic control technologies that ensure precise temperature regulation. They feature a high-resolution LCD display that provides clear visibility of the current temperature and settings. Furthermore, these thermostats have the capability to respond quickly to temperature changes, ensuring a comfortable living environment.

Aube Technologies has also incorporated various safety features in the TH102 and TH102-3. These thermostats come with built-in overload protection to prevent overheating, ensuring safe operation in residential settings. They are designed to work seamlessly with most electric heating systems, making them highly compatible with existing setups.

In summary, Aube Technologies TH102 and TH102-3 are multi-functional thermostats that provide users with effective temperature control, energy savings, and enhanced convenience. With their programmable features, sleek designs, and advanced technologies, they offer an optimal heating management solution for modern homes. Whether for everyday use or extended getaways, these thermostats adapt to various lifestyles while prioritizing safety and efficiency.