Description | Aube Technologies TH114 instruction

TH1 1 4

1 . Description

Aube’s TH114 Series non-programmable thermostats can be used to control ambient or floor temperature. The following models are available:

A model:		controls and displays the ambient temperature

F model:		controls and displays the floor temperature
		uses an external temperature sensor

AF model:		controls and displays the ambient temperature
		maintains the floor temperature within desired
		limits
		uses an external temperature sensor

User s Guide

Non-programmable Thermostat

3. I nstallation

nRefer to the installation instructions of the

power base.

o Insert the tabs at the top of the control module in the slots at the top of the power base.

p Secure the control module using the cap- tive screw underneath the base.

Note: Do not obstruct the thermostat's vents.

4. Power-up

As soon as the thermostat is powered, it undergoes a series of tests before displaying the actual tempera- ture.

GFCI fault light *

Arrow appears when the setpoint is displayed

Power output

1 to 24%

25 to 49%

50 to 74%

75 to 99%

100%

* available on certain models only

Actual or setpoint temperature

GFCI fault indicator *

Temperature adjustment button

GFCI test button * /

Backlight button *

On/Standby button

5. Error Messages

The measured temperature is below 0°C (32°F). Heat- ing is turned On.

The measured temperature is above 50°C (122°F) (A or AF model) or 60°C (140°F) (F model).

The floor sensor is defective or not properly connected (F model only), or the thermostat is defective.

6. GFCI Test

Each thermostat consists of a control module which must be mounted on a PB112 Series power base. For the selection and installation of the power base, refer to its installation instructions.

2. DI P Switch Configuration

The DIP switches are located at the back of the control module.

2.1 Temperature Display (S1 )

To switch between °C and °F.

2.2 Model (S2)

Note: Available on certain models only

F: To select the F model

AF: To select the A or AF model

Note: This procedure must be performed if the thermostat is mounted on a GFCI-equipped power base.

Test the GFCI immediately after installing the control module, and once a month there- after.

n Raise the temperature	until the heat-
ing power indicator	appears.
o Press the Test button.

p If the test is successful, you will hear a click caused by the GFCI relay tripping. The heating power indicator will disap- pear, GFI will appear and the Fault light will illuminate. Reset the thermostat by switching it to Standby and back to On.

qIf the test has failed, cut power to the heating system from the main electrical panel and call customer service.

Note: If the Fault light is On during normal operation, cut power to heating system at the main electrical panel and have an electrician verify the installation.

TH114

400-114-000-B

21/2/05

1/2

TH114 specifications

The Aube Technologies TH114 is a state-of-the-art thermostat designed to enhance the control and energy efficiency of heating systems in residential and commercial settings. Catering to users looking for reliability and advanced features, the TH114 embodies modern technology while maintaining ease of use.

One of the standout features of the TH114 is its user-friendly interface. The thermostat is equipped with a large display that provides clear visibility of settings and temperatures. This intuitive interface allows users to easily adjust settings and monitor energy usage, making it suitable for individuals of all technical skill levels. The backlit screen ensures visibility even in low-light conditions, allowing for convenient adjustments at any time of day.

The TH114 utilizes advanced temperature control technology. With its precision temperature sensor, the thermostat can accurately gauge the ambient temperature in the room, effectively managing heating cycles to maintain optimal comfort. Users can set a range of different modes, including “Eco” mode, which optimizes energy use and reduces costs without sacrificing comfort.

Connectivity is another key characteristic of the Aube Technologies TH114. While it does not feature Wi-Fi capabilities, it supports a 7-day programmable schedule that allows users to set specific heating times based on their daily routines. This feature minimizes wasted energy by adjusting the temperature when it's not necessary, in turn lowering energy bills.

The TH114 is compatible with various heating systems, including electric baseboard heaters, hydronic systems, and more, making it a flexible option for diverse setups. Its compatibility extends to both line-voltage and low-voltage systems, ensuring that it can be integrated into many different heating configurations.

Durability and safety are also integral aspects of the TH114's design. The unit is equipped with a robust casing that protects against common environmental factors, ensuring longevity. Additionally, safety features such as overheat protection provide peace of mind, especially in family homes.

In summary, the Aube Technologies TH114 thermostat combines user-friendly design, advanced temperature control technology, and compatibility with a wide range of heating systems. With its innovative features and reliable performance, the TH114 stands out as a practical choice for anyone looking to improve their heating efficiency while maintaining a comfortable living environment.