Aprilaire 8556 owner manual Thermostat, Place

Page 27

110-791B 7/12/01 8:58 AM Page 27

Once the thermostat panel has been opened and removed from the base, turn the thermostat over and locate the DIP switches found on the circuit board according to the following drawing:

Be careful to change only the intended DIP switches per the explanation given at the beginning of this section.

After the DIP switches have been set to the desired position, carefully reassemble the

thermostat.

a) Place the cover on the base by lining up the 2 round pegs on the bottom of the cover with the half circle cutouts on the top of the base. Note that the bottom of the cover when fully open slides in behind the top

of the base. Swing the cover fully open. The cover will stay

in place.

– 25 –

Image 27

Contents Model Temperature Control CoolingEquipment Control Energy Star Program Information Cool = 85˚ Heat = 70˚Cool = 78˚ Heat = 62˚Change the flashing symbol to the current day Week Setting Or Changing The Clock110-791B 7/12/01 857 AM Progressive Recovery Setting Or Changing The Program110-791B 7/12/01 857 AM Heat = Cool = Program ScheduleSetting Or Changing Program Times Night Press and release the program button. The DaySetting Or Changing Heating Temperatures Setting Or Changing Cooling Temperatures Press and release the Mode button until the word To Start Running The Program Reviewing Programmed Time Schedules Temperature SettingsThermostat Operation For Best Performance110-791B 7/12/01 858 AM Return to the program Temperature ControlTime Control Equipment Control 110-791B 7/12/01 858 AM Optional Settings For Additional Thermostat Features 110-791B 7/12/01 858 AM 110-791B 7/12/01 858 AM Following procedure must beFigure 1 carefully followed See Figure Place ThermostatTurn the thermostat power back on Case Of Power Failure Using The Available LED IndicatorsCleaning Limited Warranty BOX 1467 MADISON, WI