Niles Audio OS63SIBLACK, OS53SIBLACK manual Connecting the Loudspeaker, On page 10 for details

Page 17

Connecting the Loudspeaker

1.For each loudspeaker wire, separate the two conductors on each end so that at least 2 inches are free.

2.Strip away 1/2 inch of insulation from each conductor on each end.

3.If you have any connectors (gold pins or bananas) which you prefer to use, affix them to the stripped wire ends now. Only gold-plated connectors should be used outside, as they will not tarnish or corrode.

4.If using the bracket to attach to a solid surface, slide the loudspeaker onto the bracket. Do not tighten the knobs completely. Angle the loudspeaker so that the rear terminals are accessible.

5.Using correct polarity at the loudspeaker, connect left- and right-channel wires to the two sets of five-way binding posts, as shown in Figure 11. Connect the other end of each loudspeaker wire to the receiver (or amplifier) in the same way.

NOTE: Observe correct polarity: Positive

(+)goes to the RED post and negative

(–) goes to the BLACK post. If you are unsure of wire polarity, see the section

Checking Loudspeaker Phase on the next page.

Left Channel

Right Channel

6. If required, attach the safety cable to the

Figure 11. Loudspeaker wire

loudspeaker enclosure. See Safety First

connections.

on page 10 for details.

 

7.Verify that the loudspeaker is in-phase (see Checking Loudspeaker Phase on the next page).

8.Angle the loudspeaker for the best sound possible.

9.Tighten the bracket knobs by hand only.

NOTE: Do not use any tools for tightening. Doing so may strip the insert threads.

10. Check that the entire installation is safe and secure.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

 

15

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OS6.3Si OS5.3Si Table of Contents Introduction Stereo Input Si Design Integrated Woofer/Baffle AssemblyMica-Filled Polypropylene Woofer Cone Butyl-Rubber Woofer Cone SurroundARCHITECTURALLY-FRIENDLY Design Advanced Material ScienceLow-Diffraction Grille and Front Baffle Rigid, Acoustically-Inert CabinetParts Guide Niles Audio Corporation 1-800-BUY-HIFI Incorporating a Volume Control WiringInstallation Considerations Tools and Materials RequiredPlacing the Loudspeaker for the Best Sound Quality Recommended Amplifier PowerPlacing the Loudspeaker for the Best Sound Quality Mounting Methods Placement for more bass outputOS loudspeakers can be mounted three ways Safety FirstPainting the Loudspeaker Tools RequiredPreparing to Paint Painting the Cabinet, Bracket Knobs, and Bracket Removing the grille using an awlReplacing the Grille Painting the GrilleMounting the bracket InstallationOn page 10 for details Connecting the LoudspeakerChecking Loudspeaker Phase OPeration Listening at Higher VolumesCleaning OS6.3Si Loudspeaker SpecificationsNiles Audio Corporation 1-800-BUY-HIFI Your Exclusive Remedies for Breach of Warranty Limited WarrantyDetach here and return to Niles Audio Corporation Warranty Registration Card0 0 B U Y H I F I w w w . n i l e s a u d i o . c o m

OS53SIBLACK, OS63SIBLACK specifications

Niles Audio, a trusted name in the audio industry, has crafted two exceptional outdoor speakers: the OS63SIBLACK and OS53SIBLACK. Designed specifically for outdoor settings, these speaker models offer a combination of high-quality sound, durability, and aesthetic appeal.

The OS63SIBLACK features a 6.5-inch polypropylene woofer, which provides rich bass and exceptional clarity across various frequencies. Coupled with a 1-inch titanium tweeter, this speaker is capable of delivering crisp highs, ensuring that every note is accurately reproduced. The dual-channel design allows for a seamless blend of frequencies, making it perfect for larger outdoor areas.

On the other hand, the OS53SIBLACK is equipped with a 5.25-inch polypropylene woofer and a 1-inch aluminum dome tweeter. It offers a compact yet powerful solution for outdoor spaces where size and sound must be balanced. This model excels in clarity and detail, making it ideal for relaxing backyard gatherings or lively outdoor parties.

Both models feature Niles’ proprietary technology, including the innovative Environmental Protection (EP) design. This ensures that the speakers are resistant to water, UV rays, and extreme temperatures, making them perfect for any climate condition. Their rugged construction means they can handle the rigors of being outdoors, from rain to intense sunlight, without compromising audio quality.

Aesthetic appeal is also at the forefront of Niles’ design philosophy. Both the OS63SIBLACK and OS53SIBLACK come in a sleek black finish, allowing them to blend seamlessly into various outdoor settings without detracting from the natural beauty of the environment.

Installation is made easy with the included mounting system, which allows for flexible placement in trees, walls, or ceilings. This adaptability ensures that users can achieve optimal sound coverage regardless of their outdoor layout.

In conclusion, Niles Audio’s OS63SIBLACK and OS53SIBLACK outdoor speakers exemplify high-performance audio blended with rugged durability and innovative design. With their superior sound quality, advanced technologies, and aesthetic flexibility, these speakers are an excellent choice for anyone looking to elevate their outdoor audio experience. Whether hosting a party or enjoying a quiet evening, Niles creates an ambiance that enhances every moment.
Top Page Image Contents